Online Catalog

Accessories / Weaving

• 84/307 : DIFFERENT CYLINDERS ends shafts
  2 WORKER, 1500 x Ø 200 mm, 350/350 mm, Ø 35 mm, cast-iron, flexible
  2 WORKER, 1500 x Ø 200 mm, 400/400 mm, Ø 35 mm, cast-iron, flexible
  2 CYLINDERS, 1500 x Ø 58 mm, 400/400 mm, Ø 35 mm, flexible
  2 CYLINDERS, 1500 x Ø 58 mm, 350/350 mm, Ø 35 mm, flexible
  1 CYLINDER, 1500 x Ø 58 mm, 260/340 mm, Ø 35 mm, flexible
  1 CYLINDER, 1500 x Ø 58 mm, 200/170 mm, Ø 35 mm, metallic
  1 FANCY ROLLER, 1540 x Ø 325 mm, 400/400 mm, Ø 40 mm, flexible
  6 WORKER, 1540 x Ø 200 mm, 380/380 mm, Ø 35 mm, cast-iron, flexible
  5 STRIPPERS, 1540 x Ø 57 mm, 380/380 mm, Ø 35 mm, cast-iron, flexible
  1 CYLINDER, 1540 x Ø 57 mm, 300/260 mm, Ø 25 mm, flexible
  1 FEEDING CYL., 1540 x Ø 55 mm, 170/230 mm, Ø 50/25 mm, pin on leather
  1 FEEDING CYL., 1540 x Ø 55 mm, 400/240 mm, Ø 50/25 mm, pin on leather
  1 CYLINDER, 1540 x Ø 45 mm, 170/320 mm, Ø 40/25 mm, flexible
  1 CYLINDER, 1800 X Ø 280 mm, 350/350 mm, Ø 35 mm, flexible, "THIBEAU".
  1 CYLINDER, 1800 X Ø 280 mm, 350/350 mm, Ø 40 mm, flexible, "THIBEAU".
  1 LICKER-IN, 1800 X Ø 260 mm, 455/305 mm, Ø 40 mm, in steel, metallic "DUESBERG BOSSON".
  2 WORKERS, 1800 X Ø 215 mm, 380/380 mm, Ø 35 mm, in steel, flexible, "DUESBERG BOSSON"
  1 WORKER, 1800 X Ø 170 mm, 405/405 mm, Ø 35 mm, in steel, flexible, "DUESBERG BOSSON".
  1 CLEANING ROLLER 1800 X Ø 120 mm, 500/230 mm, Ø 35 mm, flexible "DUESBERG-BOSSON".
  1 CLEANING ROLLER 1800 X Ø 120 mm, 400/400 mm, Ø 35 mm, flexible "DUESBERG-BOSSON".
  1 CYLINDER, 1800 X Ø 100 mm, 350/350 mm, Ø 35/40 mm,
  1 CYLINDER, 1800 X Ø 58 mm, 340/340 mm, Ø 35 mm, flexible, "DUESBERG BOSSON".
  2 CYLINDER, 1800 X Ø 58 mm, 400/400 mm, Ø 35 mm, flexible, "DUESBERG BOSSON".
  1 CYLINDER, 1800 X Ø 55 mm, 340/340 mm, Ø 35 mm, flexible, "DUESBERG BOSSON".
  1 EVAPORATOR, 1800 X Ø 50 mm, 400/400 mm, Ø 35 mm, flexible, "DUESBERG BOSSON".
  1 CYLINDER, 1830 X Ø 80
• 84/317 : 108 CONDENSER TAPES, constr. "BOCKEMÜHL", type Abochrom, 4150 x 11,0 mm.
• 84/370 : 195 SPINNING CROWN, for Ring spinning frame spindles, new, bicônical crown type F4 with 4 flyers, Ø 18 mm, length 35 mm, shaft Ø 10 X 80 mm.
• 84/372 : 133 SPINDLES for Self Acting Mules, new, constr. "SMM", complete with spindle bolster, for HDB self acting mules.
• 84/385 : 100 BODY CENTRIFUGAL TWISTER TUBES, new, constr. "HOUGET DUESBERG BOSSON", for Ring spinning frame type CBP, with air-intake, delivered without pin nor porcelain.
• 84/417 : 1 UNIVERSAL MILLING MACHINE, constr. "MALICK & WALKOWS", type V.I.RE, table 1200x250 mm, with full equipment, dividing head, gears, tools, aso.
• 84/460 : WORKSHOP MACHINES, brand new :
  a) 1 HYDRAULIC WORKSHOP PRESS, type DP.775, 30 to., manual pump, dimensions (LxWxh) 1130x600x1940 mm.
  b) 1 BENDING MACHINE for sections and tubes, type PK-10, axle Ø 38 mm, 2 under rollers Ø 118 mm, 1 upper roller Ø 98 mm, motor 1 Hp., 8 rpm, (LxWxh) 550x850x1500 mm.
  d) 1 POWER HACK SAW, type BMH.170, hydraulic, cut max. Ø 170 mm, motor 1 Hp, 900 rpm, speed 120 strokes/min, (LxWxh) 1500x300x1350 mm.
  f) 1 FOLDING MACHINE, type HKC, manual, for sheets 1310x1,5 mm.
• 84/487 : 100 m TAPE, constr. "BOCKEMÜHL", type Abochrom, width 14,90 mm.
• 84/492 : 1 COILER, constr. "ROSINK", type GR.900, year 1991, for cans Ø 900x1160 mm.
• 84/499 : 1 TUBES CLEANING MACHINE, constr. "BROUWER", type AS.30, year 1980, for tubes till 300 mm.
• 84/502 : a) 1 SPINDLE BAND THERMOBONDING MACHINE, electrical, for spindle tapes 220 V.
  c) 1 PNEUM. OILING/GREASING MACHINE, constr. "STEWART & WARNER", compressed air, tank 40 l.
  d) 1 OILING PUMP, brand new, constr. "SIHI", AN.009.32.036.
  e) 1 MOTOR, brand new, constr. "ASEA", 220/380 V, 0,55 Kw, 930 rpm.
  1 MOTOR, brand new, constr. "SIEMENS", 220/380 V, 0,55 Kw, 905 rpm.
  1 MOTOR, with reducer, "GROSCHOP", monophase 220 V, 1380 rpm., 120 W.
• 84/503 : 1 STRIPPING LATTICE for hopper feeder, new, width 1750 mm, length 580 mm, woodden lattice with pins.
• 84/505 : 1 COMPRESS0R, constr. "BOGE", type SK.15, 1 cylinder, 370 l/min, 10 bar, 900 rpm, motor 380 V, 2,2 Kw, 3 Hp, 2860 rpm, tank 250 l.
• 84/514 : 22 SPINDLES, brand new, for "HOUGET DUESBERG BOSSON" Ring Spinning Frame, "SÜSSEN" WST-SH.1805, for tubes 600 mm, Ø 51/35 mm, complete with bolster.
• 84/524 : STEEL DUCKBOARDS, hot galvanized, high 40 and 50 mm :
  2070x500x50 mm
  1650x570/635x40
  1650x705/640x40
  930x800x40 mm
  910x480x40 mm
  1295x270x40 mm
  1295x270x40 mm
  570x520x40 mm
  570x500x40 mm
  880x530x40 mm
  1390x600x40 mm
  1390x600x40 mm
  1390x910x40 mm
  1390x910x40 mm
• 84/551 : 24 ROVING BOBBINS, constr. "BOCKEMÜHL", Length 1495 mm including steel washers, Ø 64x3,5 mm, plastic.
• 84/552 : 68 CONDENSER TAPES, contr. "CHIORINO", leather/nylon 4030x11,5 mm.
• 84/556 : 1 CENTIRUGAL INOX PUMP, constr. "ENSIVAL", type HV.30, suction/delivery horizontal, entry Ø 150 mm, exit Ø 125 mm, N° 106/42/Z41.
• 84/571 : 1 COMPLETE VAKUUMCLEANING SYSTEM, constr. "JACOBI", year 1997, with 1 Vacuum pump Jacobi, type Dingo WN 150AV, capacity 1608 cbm/h, vacuum 600 mbar, with motor 30 Kw, 380V/3 Ph/50 HZ in sound absorbing box, 1 filter tank, 3 waste tanks, complete with pipes, switches and control box.
• 84/574 : 2 RUBBING APRONS, fabr. "BOCKEMÜHL", 2070/2120x970 mm.
• 84/578 : 13.000 PIPE CLEANERS, for HDB Ring Spinning Frame, part Nr 5919003038.
• 84/583 : 1 TUBES CLEANING PLANT, for plastic and paper tubes, shredder for tubes, bale press.
• 84/586 : 2 PINIONS for gearbox "CATEP" R.250, pignons nr 244.26.072
  1 PINION for gearbox "CATEP" R.250, pignon nr 244.26.073
• 84/587 : 192 CONDENSER TAPES, chrom leather on both sides, middle nylon tape, 1400 x 15,2 mm.
  6 CONDENSER TAPES, chrom leather on both sides, middle nylon tape, 1400 x 20,8 mm.
  192 CONDENSER TAPES, chrom leather on both sides, middle nylon tape, 1800 x 15,2 mm.
  6 CONDENSER TAPES, chrom leather on both sides, middle nylon tape, 1800 x 20,8 mm.

Search the catalog